Spread-spectrum frequency can transmit the same frequency at the same time for more than o

bstitute for cell phone.

A．Y

B．N

C．NG

A.FREQ

B. FER

C. TUNE

D. FIND

在链表被起用之前， 频度域freq的值均初始化为零， 而每当对链表进行一次Locate(L， x)的操作后， 被访问的结点(即元素值等于x的结点) 中的频度域freq的值便增1，同时调整链表中结点之间的次序，使其按访问频度非递增的次序顺序排列，以便始终保持被频繁访问的结点总是靠近表头结点。试编写符合上述要求的Locate操作的算法。

个数据成员：指向前驱结点的指针prior、指向后继结点的指针next、存放数据的成员data和访问频度freq。所有结点的freq初始时都为0。每当在链表上进行一次Locate(x) 操作时， 令元素值为x的结点的访问频度freq加1， 并将该结点前移，链接到与它的访问频度和等的结点后面，使得链表中所有结点保持按访问频度递减的顺序排列，以使频繁访问的结点总是靠近表头。

A.到LTE的SCTP偶联状态异常

B.目标小区状态异常

C.XNAP状态异常

D.NR Freq节点下的频率band指示未配置

设有一个双向链表，每个结点中除有prior、 data 和next域外，还有一个访问频度freq域，在链表被起用之前，该域的值初始化为零。每当在链表进行一次Locata（L,x)运算后，令值为x的结点中的freq域增1，并调整表中结点的次序，使其按访问频度的非递增序列排列，以便使频繁访问的结点总是靠近表头。试写一个满足上述要求的Locata（L,x)算法。

bility Prio如果为空值的话，以下说法正确的是：（）。

A、NRcellre lease消息中不下发该4G频点

B、NRcellre lease消息中一直下发该4G频点

C、NRcellre lease消息中LTE频点的下发顺序按照ARFCN频点号排序（从小到大）依次下发

D、NRcellre lease消息中按频点优先级从高到底排序下发

Bluetooth

When you use computers, entertainment systems or telephones, the various pieces-and parts of the systems make up a community of electronic devices. These devices communicate with each other using a variety of wires, cables, radio signals and infrared light(红外线) beams, and an even greater variety of connectors and plugs.

The art of connecting things is becoming more and more complex every day. And Bluetooth has now become a new popular method of connecting devices that can streamline the process. A Bluetooth connection is wireless and automatic, and it takes small-area networking to the next level by removing the need for user intervention and keeping transmission power extremely low to save battery power.

Bluetooth Operation

Bluetooth networking transmits data via low-power radio waves. It communicates on a frequency of 2.45 gigahertz(千兆赫)(actually between 2.402 GHz and 2.480 GHz, to be exact). This frequency band has been set aside by international agreement for the use of industrial, scientific and medical devices(ISM).

A number of devices that you may already use take advantage of this same radio-frequency band. Baby monitors(微型监视器), garage-door openers and the newest generation of cordless phones all make use of frequencies in the ISM band.

One of the ways Bluetooth devices avoid interfering with other systems is by sending out very weak signals of about 1 milliwatt. By comparison, the most powerful cell phones can transmit a signal of 3 watts. The low power limits the range of a Bluetooth device to about 10 meters (32 feet), cutting the chances of interference between your computer system and your portable telephone or television. Even with the low power, Bluetooth doesn't require line of sight between communicating devices. The walls in your house won't stop a Bluetooth signal, making the standard useful for controlling several devices in different rooms.

Bluetooth can connect up to eight devices simultaneously. With all of those devices in the same 10-meter (32-foot) radius, you might think they'd interfere with one another, but it's un- likely. Bluetooth uses a technique called spread-spectrum(扩展频谱) frequency that makes it rare for more than one device to be transmitting on the same frequency at the same time. In this technique, a device will use 79 individual, randomly chosen frequencies within a designated range, changing from one to another on a regular basis. In the case of Bluetooth, the transmitters change frequencies 1,600 times every second, meaning that more devices can make full use of a limited slice of the radio spectrum. Since every Bluetooth transmitter uses spread-spectrum transmitting automatically, it's unlikely that two transmitters will be on the same frequency at the same time. This same technique minimizes the risk that portable phones or baby monitors will disrupt Bluetooth devices, since any interference on a particular frequency will last only a tiny fraction of a second.

Piconets(个人域网络)

Let's say you have a typical modern living room with the typical modern stuff inside. There's an entertainment system with a stereo, a DVD player, a satellite TV receiver and a television; there's also a cordless telephone and a personal computer. Each of these systems uses Bluetooth, and each forms its own piconet to talk between the main unit and peripheral(外围设备).

The cordless telephone has one Bluetooth transmitter in the base and another in the handset. The manufacturer has programmed each unit with an address that falls into a range of ad- dresses it has established for a particular type of device. When the base is first turned on, it sends radio signals asking for a response from any units with an address in a particular range. Since the handset has an address in the range, it responds, and a tiny network is formed. Now, even if one of these devices should receive a signal

A．Y

B．N

C．NG

Bluetooth

When you use computers, entertainment systems or telephones, the various pieces and parts of the systems make up a community of electronic devices. These devices communicate with each other using a variety of wires, cables, radio signals and infrared light(红外线) beams, and an even greater variety of connectors and plugs.

The art of connecting things is becoming more and more complex every day. And Bluetooth has now become a new popular method of connecting devices that can streamline the process. A Bluetooth connection is wireless and automatic, and it takes small-area networking to the next level by removing the need for user intervention and keeping transmission power extremely low to save battery power.

Bluetooth Operation

Bluetooth networking transmits data via 10w-power radio waves. It communicates on a frequency of 2.45 gigahertz(千兆赫)(actually between 2.402 GHz and 2.480 GHz, to be exact). This frequency band has been set aside by international agreement for the use of industrial, scientific and medical devices(ISM).

A number of devices that you may already use fake advantage of this same radio-frequency band. Baby monitors(微型监视器), garage-door openers and the newest generation of cordless phones all make use of frequencies in the ISM band.

One of the ways Bluetooth devices avoid interfering with other systems is by sending out very weak signals of about 1 milliwatt. By comparison, the most powerful cell phones can transmit a signal of 3 watts. The low power limits the range of a Bluetooth device to about 10 meters(32 feet), cutting the chances of interference between your computer system and your portable telephone or television. Even with the low power, Bluetooth doesn't require line of sight between communicating devices. The Walls in your house won't stop a Bluetooth signal, making the standard useful for controlling several devices in different rooms.

Bluetooth can connect up to eight devices simultaneously. With all of those devices in the same 10-meter(32-foot) radius; you might think they'd interfere with one another, but it's unlikely. Bluetooth uses a technique called spread-spectrum.(扩展频谱) frequency that makes it rare for more than one device to be transmitting on the same frequency at the same time. In this technique, a device will use. 79 individual, randomly chosen frequencies within a designated range, changing from one-to another on a regular basis. In the case of Bluetooth. the transmitters change frequencies 1,600 times every second, meaning that more devices can make full use of a limited slice of the radio spectrum. Since every Bluetooth transmitter uses spread-spectrum transmitting automatically, it's unlikely that two transmitters will be on the same frequency at the same time. This same technique minimizes the risk that portable phones or baby monitors will disrupt Bluetooth devices, since any interference on a particular frequency will last only a tiny fraction of a second.

Piconets(个人域网络)

Let's say you have a typical modern living room with the typical modern Stuff inside. There's an entertainment system with a stereo, a DVD player, a satellite TV receiver and a television; there's also a cordless telephone and a-personal computer. Each of these systems uses Bluetooth, and each forms its own piconet to talk between the main unit and peripheral(外围设备).

The cordless telephone has one Bluetooth transmitter in the base and another in the handset. The manufacturer has programmed each unit with an address that falls into a range of addresses it has established for a particular type of device. When the base is first turned on, it sends radio signals asking for a response from any units with an address in a particular range. Since the handset has an address in the range, it responds, and a tiny network is formed. Now, even if one of these device

A．Y

B．N

C．NG